| Inverter Part |
| Supply Voltage (VPN) | Applied between P- NU, NV, NW | 450 | V |
| Supply Voltage (Surge) (VPN(Surge)) | Applied between P- NU, NV, NW | 500 | V |
| Collector - Emitter Voltage (VCES) | | 600 | V |
| Collector Current (IC) | TC = 25C | 5 | A |
| Collector Current (Peak) (ICP) | TC = 25C, Under 1ms Pulse Width | 10 | A |
| Collector Dissipation (PC) | TC = 25C per Chip | 25 | W |
| Operating Junction Temperature (TJ) | | -20 ~ 125 | C |
| Collector - Emitter Saturation Voltage (VCE(SAT)) | VCC = VBS = 15 V, VIN = 5 V, IC = 5 A, TJ = 25C | - | 2.3 | V |
| FWDi Forward Voltage (VF) | VIN = 0 V, IC = 5 A, TJ = 25C | - | 2.1 | V |
| Switching Time (tON) (HS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive
Load | - | 0.40 | s |
| Switching Time (tC(ON)) (HS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive
Load | - | 0.21 | s |
| Switching Time (tOFF) (HS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive
Load | - | 0.68 | s |
| Switching Time (tC(OFF)) (HS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive
Load | - | 0.25 | s |
| Switching Time (trr) (HS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive
Load | - | 0.10 | s |
| Switching Time (tON) (LS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive
Load | - | 0.56 | s |
| Switching Time (tC(ON)) (LS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive
Load | - | 0.28 | s |
| Switching Time (tOFF) (LS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive
Load | - | 0.72 | s |
| Switching Time (tC(OFF)) (LS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive
Load | - | 0.25 | s |
| Switching Time (trr) (LS) | VPN = 300 V, VCC = VBS = 15 V, IC = 5 A, VIN = 0 V 5 V, Inductive
Load | - | 0.10 | s |
| Collector - Emitter Leakage Current (ICES) | VCE = VCES | - | 250 | A |
| Control Part |
| Control Supply Voltage (VCC) | Applied between VCC(UH), VCC(VH), VCC(WH), VCC(L) - COM | 20 | V |
| High-Side Control Bias Voltage (VBS) | Applied between VB(U) - VS(U), VB(V) - VS(V), VB(W) - VS(W) | 20 | V |
| Input Signal Voltage (VIN) | Applied between IN(UH), IN(VH), IN(WH), IN(UL), IN(VL), IN(WL) -
COM | -0.3 ~ 17 | V |
| Fault Output Supply Voltage (VFO) | Applied between VFO - COM | -0.3 ~ VCC+0.3 | V |
| Fault Output Current (IFO) | Sink Current at VFO Pin | 5 | mA |
| Current-Sensing Input Voltage (VSC) | Applied between CSC - COM | -0.3 ~ VCC+0.3 | V |
| System Ratings |
| Self-Protection Supply Voltage Limit (VPN(PROT)) | VCC = VBS = 13.5 ~ 16.5 V, TJ = 125C, Non-Repetitive, < 2 s | 400 | V |
| Module Case Operation Temperature (TC) | -20C TJ 125C | -20 ~ 100 | C |
| Storage Temperature (TSTG) | | -40 ~ 125 | C |
| Isolation Voltage (VISO) | 60 Hz, Sinusoidal, AC 1 Minute, Connect Pins to Heat Sink Plate | 2500 | Vrms |
| Thermal Resistance |
| Junction to Case Thermal Resistance (Rth(j-c)Q) | Inverter IGBT Part (per 1 / 6 module) | - | 3.9 | C/W |
| Junction to Case Thermal Resistance (Rth(j-c)F) | Inverter FWD Part (per 1 / 6 module) | - | 5.3 | C/W |
