| Inverter Section (Max Ratings) |
| Power Supply Voltage (VCC) | Applied between P - NU, NV, NW | 450 | V |
| Power Supply Voltage (Surge) (VCC(Surge)) | Applied between P - NU, NV, NW | 500 | V |
| Collector-Emitter Voltage (VCES) | - | 600 | V |
| Collector Current (IC) | TC = 25C | ±30 | A |
| Collector Current (Peak) (ICP) | TC= 25C, Pulse width < 1ms | ±60 | A |
| Collector Power Dissipation (PC) | TC = 25C, single chip | 103 | W |
| Junction Temperature (Tj) | (See Note 1) | -40~+150 | °C |
| Control Section (Max Ratings) |
| Upper Arm Control Power Supply Voltage (VDB) | Applied between UFB U, VFB-V, WFB-W | 20 | V |
| Control Power Supply Voltage (VD) | Applied between VP1 VNC, VN1 VNC | 20 | V |
| Input Signal Voltage (VIN) | Applied between UP, VP, WP, UN, VN, WN VNC | -1~10 | V |
| Fault Output Voltage (VFO) | Applied between FO VNC | -0.5~VD+0.5 | V |
| Fault Output Current (IFO) | FO terminal sink current | 1.5 | mA |
| Current Detection Input Voltage (VSC) | Applied between CIN VNC | -0.5~VD+0.5 | V |
| Electrical Characteristics |
| Junction to Case Thermal Resistance (Rth(j-c)Q) | Single IGBT element | - | 1.6 | °C/W |
| Junction to Case Thermal Resistance (Rth(j-c)F) | Single FRD element | - | 2.5 | °C/W |
| Collector-Emitter Saturation Voltage (VCE(sat)) | VD = VDB = 15V, VIN = 5V, IC =30A, Tj= 25°C | - | 1.75 - 2 | V |
| Forward Conduction Voltage (VF) | VIN = 0V, IC =-30A, Tj = 25°C | 1.36 - 1.6 | V |
| Turn-on Time (tON) | VCC = 300V, VD = VDB = 15V, IC =30A, VIN = 0V5V, Inductive Load | - | 850 | ns |
| Turn-off Time (tOFF) | VCC = 300V, VD = VDB = 15V, IC =30A, VIN = 0V5V, Inductive Load | - | 580 | ns |
| Turn-on Switching Loss (Eon) | IC = 15A, VCC = 400V, VD=VDB = 15V, RG = 22Ω, L = 1.0mH, Tj = 25°C | - | 114 - 168 | uJ |
| Turn-off Switching Loss (Eoff) | IC = 15A, VCC = 400V, VD=VDB = 15V, RG = 22Ω, L = 1.0mH, Tj = 25°C | - | 420 - 486 | uJ |
| Collector-Emitter Leakage Current (ICES) | VCE= VCES, Tj= 25°C | - | - 65 | uA |
| Collector-Emitter Leakage Current (ICES) | VCE= VCES, Tj= 125°C | - | - 1 | mA |
| Static VD Current (ID) | VD = 15V, VIN = 5V, VP1-VNC | - | 0.36 | mA |
| Static VDB Current (IDB) | VDB = 15V, VIN = 5V, UFB - U, VFB - V, WFB - W | - | 100 - 220 | uA |
| Short-circuit Forward Trigger Threshold (Vsc,TH+) | VD = 15V | 0.37 - 0.47 - 0.65 | V |
| Under Voltage Lockout Trigger Level (UVDD) | - | 9.0 - 10.4 - 11.0 | V |
| Under Voltage Lockout Reset Level (UVDR) | - | 10.0 - 11.2 - 12.0 | V |
| Input Signal Turn-on Threshold Voltage (VIN(ON)) | Applied between UP,VP,WP,UN,VN,WN and VNC | 1.5 - 2.2 - 2.5 | V |
| Input Signal Turn-off Threshold Voltage (VIN(OFF)) | - | 1 - 1.26 - 1.4 | V |
| Temperature Output Voltage (VOT) | Tc=90°C | 1.53 - 1.59 - 1.65 | V |
| Temperature Output Voltage (VOT) | Tc=25°C | 4.15 - 4.17 - 4.19 | V |
| Over-temperature Protection (OTt) | LVIC temperature | 100 - 120 - 140 | °C |
| Recommended Operating Conditions |
| Power Supply Voltage (Vcc) | Applied between P NU, NV, NW | 0 - 300 - 400 | V |
| Control Power Supply Voltage (VD) | Applied between VP1 VNC | - 15 - | V |
| Upper Arm Control Power Supply Voltage (VDS) | Applied between VUFB U, VVFB V, VWFB-W | - 15 - | V |
| PWM Frequency (fPWM) | -20°C≤Tc ≤+100°C, -20°C≤Tj≤+150°C | - - 20 | kHz |
| Junction Temperature (Tj) | - | -20 - 125 | °C |
