| Peak Repetitive Off-State Voltage | VDRM, VRRM | 600 | 800 | V | 1 |
| On-State RMS Current | IT (RMS) | 8.0 | 8.0 | A | TC = 105C |
| Average On-State Current | IT(AV) | 5.1 | 5.1 | A | TC = 105C |
| Peak Non-Repetitive Surge Current | ITSM | 80 | 80 | A | 1/2 Cycle, 60 Hz, TJ = 110C |
| Circuit Fusing Consideration | I2t | 26 | 26 | Asec | t = 8.3 ms |
| Forward Peak Gate Power | PGM | 5.0 | 5.0 | W | Pulse Width 10 sec, TC = 105C |
| Forward Average Gate Power | PGM (AV) | 0.5 | 0.5 | W | t = 8.3 msec, TC = 105C |
| Forward Peak Gate Current | IGM | 2.0 | 2.0 | A | Pulse Width 1.0 sec, TC= 105C |
| Operating Junction Temperature Range | TJ | -40 to 125 | -40 to 125 | C | |
| Storage Temperature Range | Tstg | -40 to 150 | -40 to 150 | C | |
| Thermal Resistance, Junction-to-Case | RJC | 2.2 | 2.2 | C/W | |
| Thermal Resistance, Junction-to-Ambient | RJA | 88 | 88 | C/W | Surface mounted on minimum recommended pad size. |
| Thermal Resistance, Junction-to-Ambient | RJA | 80 | 80 | C/W | Note 2 |
| Maximum Device Temperature for Soldering | TL | 260 | 260 | C | Note 3 |
| Peak Repetitive Forward or Reverse Blocking Current | IDRM, IRRM | 0.01 | 0.01 | mA | VAK = Rated VDRM or VRRM, RGK = 1.0 k, TJ = 25C |
| Peak Repetitive Forward or Reverse Blocking Current | IDRM, IRRM | 5.0 | 5.0 | mA | VAK = Rated VDRM or VRRM, RGK = 1.0 k, TJ = 110C |
| Critical Rate of Rise of Off-State Voltage | dv/dt | 50 | 50 | V/s | VAK = Rated VDRM, Gate Open, TJ = 125C |
| Peak On-State Voltage | VTM | 1.8 | 1.8 | V | ITM = 16 A, Pulse Test |
| Gate Trigger Current (Continuous dc) | IGT | 7.0 | 7.0 | A | VAK = 12 Vdc, RL = 100 , TJ = 25C |
| Gate Trigger Current (Continuous dc) | IGT | 15 | 15 | A | VAK = 12 Vdc, RL = 100 , TJ = -40C |
| Gate Trigger Current (Continuous dc) | IGT | 30 | 30 | A | VAK = 12 Vdc, RL = 100 , TJ = 125C |
| Gate Trigger Voltage (Continuous dc) | VGT | 0.65 | 0.65 | V | VD = 12 V, RL = 100 , TJ = 25C |
| Gate Trigger Voltage (Continuous dc) | VGT | 1.0 | 1.0 | V | VD = 12 V, RL = 100 , TJ = -40C |
| Gate Trigger Voltage (Continuous dc) | VGT | 2.0 | 2.0 | V | VD = 12 V, RL = 100 , TJ = 125C |
| Holding Current | IH | 22 | 22 | mA | TJ = 25C |
| Holding Current | IH | 30 | 30 | mA | TJ = -40C |
| Holding Current | IH | 60 | 60 | mA | TJ = 125C |
| Latching Current | IL | 22 | 22 | mA | TJ = 25C |
| Latching Current | IL | 30 | 30 | mA | TJ = -40C |
| Latching Current | IL | 60 | 60 | mA | TJ = 125C |
