| Absolute Maximum Ratings |
| Collector-Emitter Voltage (Pins 7~10) | VCE | | -0.5 | | 50 | V |
| COM Pin Voltage (Pin 6) | VCOM | | | | 50 | V |
| Input Voltage (Pins 1~4) | VI | | -0.5 | | 30 | V |
| Collector Peak Current (per channel) | ICP | | | | 500 | mA/ch |
| Output Clamp Diode Peak Forward Current | IOK | | | | 500 | mA |
| Total Emitter Peak Current | IET | | | | -1.5 | A |
| Maximum Junction Temperature | TJ | | | | 150 | |
| Storage Temperature Range | Tstg | | -60 | | +150 | |
| Recommended Operating Conditions |
| Collector-Emitter Voltage | VCE | | 0 | | 50 | V |
| Output Current (per channel) | IOUT | TPW=25ms, TA=85, TJ=120, Duty=10% | 0 | | 233 | mA/ch |
| Output Current (per channel) | IOUT | TPW=25ms, TA=85, TJ=120, Duty=50% | 0 | | 70 | mA/ch |
| Control Signal Input Voltage | VIN | | 0 | | 24 | V |
| Input Voltage (Output ON) | VIN(ON) | Iout=400mA, hFE=800 | 2.8 | | 24 | V |
| Input Voltage (Output OFF) | VIN(OFF) | | 0 | | 0.7 | V |
| Clamp Diode Reverse Voltage | VR | | | | 50 | V |
| Clamp Diode Peak Forward Current | IF | | | | 350 | mA |
| Operating Temperature Range | TA | | -40 | | +85 | |
| Electrical Characteristics |
| On-State Input Voltage | VI(ON) | VCE=2V, IC=200mA | 1.9 | 2.4 | | V |
| On-State Input Voltage | VI(ON) | VCE=2V, IC=250mA | 2.0 | 2.7 | | V |
| On-State Input Voltage | VI(ON) | VCE=2V, IC=300mA | 2.1 | 3 | | V |
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=30mA | | 0.78 | | V |
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=60mA | | 0.82 | | V |
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=120mA | | 0.9 | | V |
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=240mA | | 1.1 | | V |
| Collector-Emitter Saturation Voltage | VCE(SAT) | VI=2.4V, IC=350mA | | 1.25 | | V |
| Clamp Diode Forward Voltage | VF | IF=350mA | 1.4 | 1.6 | | V |
| Collector Cut-off Leakage Current | ICEX | VCE=50V, II=0 | | | 50 | A |
| Collector Cut-off Leakage Current | ICEX | VCE=50V, TA=85, VI=0V | | | 100 | A |
| Input Current | II | VIN=12V, IC=60mA | | 4 | | mA |
| Input Current | II | VIN=6V | | 1.7 | | mA |
| Input Current | II | VIN=4.5V | | 1.1 | | mA |
| Input Current | II | VIN=2.4V | | 0.35 | | mA |
| Clamp Diode Reverse Current | IR | VR=50V | | | 100 | A |
| Input Capacitance | CIN | | | 15 | | pF |
| Propagation Delay Low-to-High | tPLH | VL=12V, RL=45 | | 0.15 | 1 | s |
| Propagation Delay High-to-Low | tPHL | VL=12V, RL=45 | | 0.15 | 1 | s |